Front Range Furnaceby Front Range Bath (719) 427-5404Call

Furnace replacement · Colorado Springs

Furnace replacement for Front Range winters.

High-efficiency gas furnaces sized for your home, set up for our altitude, and installed by a licensed HVAC contractor we work with — plus an honest look at whether a heat pump makes sense for you.

  • High-efficiency condensing gas furnaces
  • Set up for high elevation per the manufacturer’s instructions
  • Heat pump and dual-fuel options, if you want to compare
  • Free in-home consultation and a written quote
70° HIGH-EFFICIENCY SET FOR ALTITUDE

Get a free furnace consultation

Tell us about your current furnace. We'll call to set up a visit.

Phone or email — at least one, so we can reach you.

Prefer to talk? Call (719) 427-5404, Mon–Fri, 9am–5pm.

Why replace

What a new furnace can do

Furnaces have improved a lot. A properly sized, properly installed modern furnace can be more efficient, more comfortable and quieter than the one you have.

High efficiency

Condensing furnaces capture extra heat from their exhaust and carry AFUE ratings of 90% or more, meaning most of the fuel you pay for becomes heat in your home.

Steadier, quieter heat

Two-stage and modulating furnaces run at lower output most of the time, which means fewer temperature swings and less noise.

Right for our altitude

Gas furnaces must be set up for high elevation according to the manufacturer’s instructions. At over 6,000 feet, that step matters.

Sized to your home

An oversized furnace short-cycles — turning on and off too often — which wastes energy and wears parts. Sizing should start with your home, not the old unit’s label.

Peace of mind

A new furnace comes with modern safety controls. It’s also a good moment to make sure you have working carbon monoxide alarms.

Heat pump option

Curious about heat pumps? We’ll compare a furnace, a heat pump and a dual-fuel system for your home. Learn about heat pumps.

Built for the Front Range

Furnaces in Colorado Springs homes

A long heating season at high elevation puts specific demands on a furnace.

  • A long heating season

    Cold nights arrive early in the fall and hang on into spring, so your furnace works for a big part of the year. Efficiency adds up.

  • Altitude setup

    Thinner air affects combustion. High-altitude setup per the manufacturer’s instructions helps the furnace burn properly and safely.

  • Venting and snow

    High-efficiency furnaces vent through PVC pipes, often out a side wall. Those vents need to stay clear of drifting snow, so placement matters.

  • Dry winter air

    Heating dries out already-dry Colorado air. If that bothers you, ask about humidification options while we’re there.

Signs it may be time to replace

  • Your furnace is getting old and repairs are adding up
  • Heating bills keep rising without a clear reason
  • Some rooms are always colder than others
  • It turns on and off frequently, or runs constantly
  • New rattling, banging or squealing noises
  • A yellow or flickering burner flame instead of steady blue

Smell gas? Leave the house right away and call your gas utility or 911 from outside. Don’t use switches or phones inside.

How it works

How furnace replacement works

Clear steps, a written quote, and installation by licensed HVAC pros.

  1. Step 1: Free in-home consultation

    We look at your current furnace, venting, ductwork and thermostat, and talk about comfort problems and your budget.

  2. Step 2: Recommendation and written quote

    We recommend the right furnace for your home — or a heat pump or dual-fuel system if it fits better — and give you a written quote.

  3. Step 3: Professional installation

    A licensed HVAC contractor we work with removes the old furnace, installs and sets up the new one for altitude, and tests it.

Questions

Frequently asked questions

Should I repair or replace my furnace?

It depends on the furnace’s age, its condition, how often it needs repairs and how comfortable your home is. We’ll give you an honest opinion during the consultation.

How long does furnace replacement take?

A straightforward replacement is often done in about a day. Changes to venting, gas lines or ductwork can add time. We’ll tell you what to expect for your home.

How much does a new furnace cost?

It depends on the furnace you choose and the work your home needs. We’ll give you a written quote after the free consultation.

Furnace or heat pump — which should I get?

Both can work well here. A furnace is a familiar, powerful heat source; a cold-climate heat pump adds cooling and runs on electricity; a dual-fuel system combines them. We’ll compare them for your home.

Is there a federal tax credit?

Not for 2026 installations — the federal 25C and 25D energy credits ended, so we don’t promise one. Ask us about current utility rebates (for example Colorado Springs Utilities or Xcel Energy) — we’ll help you check what applies.

Who installs the furnace?

HVAC installation is performed by a licensed HVAC contractor we work with. Front Range Bath handles the consultation, quote and coordination.

What size furnace do I need?

That depends on your home’s size, insulation, windows and layout — not just the size of the furnace you have now. We’ll look at those during the consultation.

Free in-home consultation

Get ahead of the next cold snap

Book a free in-home consultation. We’ll look at your current furnace and follow up with a written quote.

  • Call or text (719) 427-5404
  • Mon–Fri, 9am–5pm
  • Front Range Bath, 2755 Delta Pl, Suite B, Colorado Springs, CO 80910

Request a free consultation

We'll call you to find a time that works.

Phone or email — at least one, so we can reach you.

Prefer to talk? Call (719) 427-5404, Mon–Fri, 9am–5pm.

Call now Free consultation